Have engine - Will Travel. If you already have an engine, remote control and accessories, change body styles in minutes. Makes the hobby much more exciting.
Both of these models feature the Simple-7 System. This system uses seven butterfly nuts to complete assembly. Just add a 4-channel radio and .40 to .46 sized engine and you're done!
All control linkage cuts and installation, fuel tank installation, and all servo cutouts are done at the factory. With Megatech's
Sure Mount motor mounting system even the engine is installed in minutes.
Megatech Capitol Flyer & Megatech Skyliner Features- All Balsa and plywood construction
- Nose Gear and linkages pre-mounted and adjusted
- Main Landing Gear attaches with only three wing nuts
- All hinges glued and screw-pinned for maximum security
- All servo and switch cutouts are made and pre-drilled
- Sure Fit motor mount provides ridged mounting in minutes for .40-.54 2 stroke or .52-.60 4 stroke sized engines
- Throttle Linkage is installed and cut to length
- Ultra Light
Wing Loading 18-19 oz per sq. foot (depending on equipment used)
- Super Stable and Easy to Fly
- Capitol Flyer
Semi-Symmetrical ARF Functions: Ailerons, Elevator, Rudder and Throttle
Megatech Capitol Flyer Specifications- Length: 47 inches
- Wingspan: 17-20 Oz. per square foot
- Weight: 5-6 lbs (depending on equipment used)
|
Megatech Skyliner Specifications- Length: not available at this time
- Wingspan: not available at this time
- Weight: not available at this time
|
Requires: (all sold separately)- .40 - .54 sized 2-stroke or .52 - .60 size 4-stroke model airplane engine
- 4-Channel radio system with servos
- Fuel ( specific to engine requirements)
- 4-way glow plug prop wrench
- Glow plug ignitor battery
- Starter
 |
Chris Chianelli of the Do-it-Yourself Network's Radio Control Hobbies
has tested the Nitro Skyliner and Capitol Flyer ARF models and said,
"Megatech has redefined the meaning of ARF (Almost Ready to Fly).
The servos screw into the mounted and cutout servo tray; any .40 to
.46 sized 2-stroke motor bolts into the CNC machined universal
aluminum motor mount in minutes; and then the entire process is
completed by Megatech’s Simple-7-System: That being, just screw
in seven wing nuts that attach the wing halves, mounts the main
landing and mount the tail group and, believe it or not, you’re done!
|
All control linkages and fuel lines are cut to exact lengths and mounted for you. In minutes you have a large, all balsa and plywood quality trainer that’s incredibly easy to fly because super light wing loading. Wow, they never had anything like this when I was a kid!"
Accessory (MTC4709) M-46 engine Specifications (Sold Separately Below)- Twin Ball-bearing
- True ABC Construction
- Sure Temper Hardened Crankshaft
- Twin Needle Accu-Flo Carburetor
